Home . Cardiology Equipment . Stress Test Systems . GE Marquette Series 2000 Treadmill

GE Marquette Series 2000 Treadmill

Item #: T2000
Available Refurbished
  • Description
  • Specifications
Series 2000 Treadmill "Unmatched Performance, Safety and Value"

Versatile performance allows use on a wider range of patients, up to 450 lbs. and speeds from 0 to 13.5 mph. Unmatched safety 60 inch walking surface, standard emergency stop switch, 0 mph start speed, full handrail configuration complies with AHA Guidelines. Unmatched reliability with less moving parts and simpler design. Less maintenance required with a digital controller that negates the need for frequent speed and grade calibrations.

Performance:

Maximum Rated Load: 182 kg (450 lbs.) Drive Motor: 3.0 HP, brushless, DC motor Elevation Motor: 0.13 HP Belt Speed Range: 0.0 to 22.5 km/hr (0 to 13.5 mph) at 60 Hz, continuously variable, zero mph start-up Belt Speed Acceleration/Deceleration: Approximately 0.8 km/sec (0.5 mph/sec) Elevation Range: 0.0 to 25.0% grade, continuously variable Elevation Range Increase/Decrease: 1.14%/sec Manual Treadmill Controller (Optional): Functions: On, Off, Up, Down, Fast, Slow, Automatic Protocol Selection, Elapsed Time, Distance Traveled Automatic Protocols: 15 exercise and 15 rehabilitation (includes Bruce, Naughton, Balke II, Ellestad, Low Performance) Maximum Leakage Current: 100 A, chassis to ground Interface: RS-232 service port, 9600 baud (VT 100 or equivalent) RS-422 serial port, 9600 baud (CASE 12/15, MAX-1, MAC VU, and CENTRA Stress Systems)

  • Physical Specifications
  • Weight: 181.4 kg (400 lb)
  • Walking Area: 45.7 cm x 152.4 cm (18 in x 60 in)
  • Floor Space Required: 73.7 cm x 195.6 cm (29 in x 77 in)
  • Walking Surface Height: 14.0 cm (5.5 in)
  • Handrail Height Above Walking Surface: Front: 101.6 cm (40 in)
  • Side: Maximum 88.9 cm (35 in) descending at 5 angle to 81.3 cm (32 in)
  • Power/Environmental Specifications
  • Power Requirements: 200 to 240 VAC, 60 Hz, single phase, 20 A, NEMA 6-20 R wall socket (dedicated circuit recommended)
  • Power Consumption: 1540 watts
  • Operating Conditions:
  • Ambient temperature: 10C to 35C (50F to 95F)
  • Relative humidity: 20% to 90%
  • Storage Conditions:
  • Temperature range: -18C to 49C (0F to 120F)
  • Relative humidity: 20% to 90%